Isolation valve
Stainless steel ball valves
Stainless steel ball valve product information for distributors, OEM buyers and industrial project procurement.
Open product notesProduct catalog / stainless steel valves
Start with the valve type. Confirm the details before you buy.
Browse current product routes and representative configurations, then narrow the requirement by function, service, construction, material, connection and document scope.
Detailed product routes
Start with an established selection route
These families include application notes, specification questions and supporting reference sources.
Non-return valve
Swing check valves
Swing check valve product information covering application, flow direction and specification questions.
Open product notes
Isolation valve
Gate valves
Gate valve product information for pipeline isolation and industrial valve sourcing.
Open product notesAdditional valve configurations
A broader route into custom enquiries
These original product renderings help identify the construction you need. They are not delivery photos or fixed specifications; final geometry, materials, dimensions and documentation depend on an approved drawing and order review.
Isolation
Three-piece threaded ball valve
A maintainable three-piece body route for compact threaded piping systems.
Review before quotationConfirm thread standard, bore, seat, pressure-temperature duty and material grade.
Discuss this configuration 
Isolation
Flanged floating ball valve
A flanged quarter-turn route for general industrial on/off service.
Review before quotationConfirm flange standard, pressure class, bore, seat, stem and fire-safe requirements.
Discuss this configuration 
Isolation
Flanged wedge gate valve
A rising-stem gate-valve route for full-open or full-closed isolation duty.
Review before quotationConfirm wedge pattern, trim, stem arrangement, class, flange facing and operation.
Discuss this configuration 
Flow regulation
Flanged globe valve
A globe-body route for shut-off duties that may require more flow control than a gate valve.
Review before quotationConfirm flow direction, plug and seat design, allowable pressure drop and actuation.
Discuss this configuration 
Non-return
Flanged swing check valve
A full-body non-return route for applications suited to a hinged disc.
Review before quotationConfirm installation position, minimum flow, pressure class, seat and inspection access.
Discuss this configuration 
Non-return
Wafer dual-plate check valve
A compact wafer route where installation length and closing response matter.
Review before quotationConfirm flange compatibility, spring material, cracking pressure and orientation.
Discuss this configuration 
Flow regulation
Wafer butterfly valve
A compact quarter-turn route for isolation or controlled flow applications.
Review before quotationConfirm liner or seat, disc and stem materials, flange pairing and operating torque.
Discuss this configuration 
Line protection
Flanged Y-strainer
A line-protection route for capturing debris ahead of sensitive equipment.
Review before quotationConfirm mesh or perforation, screen material, cleanout arrangement and pressure loss.
Discuss this configuration 
Automation
Pneumatic actuated ball valve
An automated isolation route combining a three-piece valve and pneumatic actuator.
Review before quotationConfirm fail position, air supply, cycle time, accessories, control signal and sizing torque.
Discuss this configuration Image note: Representative product renderings for enquiry routing. Final construction is subject to Hande's current drawing review and written quotation.
Product finder
Not sure which route fits?
Start with what the valve must do and the conditions around it. A request can be reviewed even when the final construction is not known.
Use the RFQ checklist →Function
Isolation, non-return, throttling or another flow-control duty.
Service
Fluid, pressure, temperature, concentration, solids and operating cycles.
Construction
Body pattern, bore, seat, stem, actuation and maintenance access.
Order scope
Quantity, marking, packing, drawing, inspection and test records.
Special requirements
Do not force an unlisted valve into the nearest category.
Needle, plug, diaphragm, cryogenic, lined and other special-service valves require their own construction and application review.
Send the source information
A drawing, MTO, nameplate photo, existing part number or short list of operating conditions can be enough to identify the next questions.
Request a technical review →